In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and techniques that you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the home, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it is actually quite straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not just cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so that you get something which looks like a cone. The most important thing here is to be realistic with what type of paper plate that you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak when you place the mask on. Make sure that the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It’s also a good idea to wipe away any excess paint after you are done, so you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask onto your dog’s head. First you need to be certain that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you can start to glue the mask onto the dog’s face. dog respirator mask Take the piece of cardboard that’s used for the base of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged firmly onto the face of your dog. Do not make the folds too big or else it might look messy. As soon as you’ve done this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask onto the dog. Make certain the ears are flat and be certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you’re using a dog mask because your dog protection, you will have to do some sanding to make certain it’s safe on your dog. You can do this by sanding off any excess paper that may have been removed from your mask.